What Is It?
You need an electrical permit any time electrical wiring is installed, altered, extended, or connected to any electrical equipment, including signs.
- 2020 Seattle Electrical Code Quick Reference
- 2020 Seattle Electrical Code Replacement Pages
You may not need a permit for some residential or minimally-sized low-voltage systems.
Special events, such as street fairs, that have temporary power installations do require an electrical permit.
Any professional applying for electrical permits must have a Washington State electrical contractor’s license and a Seattle business license. Property owners may do their own work when they own and occupy the property they’re working on.
Some projects require plan review and are not issued the same day. See Seattle Electrical Code Article 80, Sections 80.50 and 80.51, to determine if you need plan review.
How Much Does It Cost?
Our fees depend on what you are installing or altering. All fees are subject to an additional technology fee. See our Fee Subtitle for details.
- Fee Subtitle
- 2024 Electrical Plan Review Fees
How Long Does It Take?
We issue many electrical permits on the same day that you apply online. If your permit requires plan review, our turnaround times depend on the accuracy and completeness of your plans, and the number of plans that are in the review queue. It will take a few weeks before we issue your permit if you don't need to make corrections.
Steps To Get Your Permit
Determine permitting and plan review requirements. Carefully review the Seattle Electrical Code Article 80 to see if you need a permit or plan review. Sections 80.50 and 80.51 explain the requirements.
- 2020 Seattle Electrical Code Quick Reference
Read our Tips. Read our Tips for information to help you complete your project.
- Tip 104, Getting an OTC (Over-the-Counter) Permit
- Tip 132, Installation of Electric Vehicle (EV) Charger for Single Family and Multifamily Homes - Green Building
- Tip 133, Installation of Electric Vehicle (EV) Charger for Commercial Properties
- Tip 339, Emergency and Standby Power Systems
- Tip 419, Commissioning for Nonresidential Mechanical and Lighting Systems
- Tip 420, Solar Energy Systems
Determine restrictions to your project. Research our codes to determine other requirements for your construction project.
- Seattle Building Code
- Seattle Electrical Code
- Seattle Energy Code
- Seattle Mechanical Code
- Seattle Land Use Code
Attend a coaching session. We offer 20 minutes of free video coaching through the Applicant Services Center to answer electrical permit questions.
Ask a question. Email SCI_electricalplanreview@seattle.govfor electrical technical support.
Coordinate with other agencies. You may need permits or approvals from other agencies. These are the most common agencies you may need to work with for your electrical permit:
- Seattle City Light (service changes or new services)
- Fire Marshall (alarms & sprinklers)
- Seattle Business Licensing (required to do business in Seattle)
- Seattle Labor Standards – Hiring Independent Contractors
First, determine if your project requires plan review.
If your permit does not require plan review:
- Most permits – You can apply online by choosing the Permit – Trade, Construction, and Land Use link and then selecting the appropriate electrical permit. You can print your permit the same day. For permits with an electrical heater as the primary heat source, you will need a Heat Equipment Sizing Form to apply.
- Small solar PV systems – If your solar PV system is rated under 7.7KW, you can apply online without plan review. However, you must have your plans and the manufacturer installation instructions available at the job site during your electrical inspection.
If your permit requires plan review, you can submit your plans and specifications electronically through the Seattle Services Portal by choosing the Permit – Trade, Construction, and Land Use link and then selecting the appropriate electrical permit.
Pay fees.You will need to pay your permit fees when you submit your application. See the 2024 Electrical Plan Review Fees or the Fee Subtitle to estimate your permit costs.
Make corrections and resubmit your plans. Once all of our reviews are done, you will receive an email telling you that corrected and/or additional documents can be uploaded into your portal. Your project may require multiple correction rounds before our reviews are complete.
- How to Respond to Review Comments
- Video: How to Respond to Corrections
- Resolve a Permit Disagreement
- Submittal Requirements for Electrical Plan Review (Section 80.51)
Pay final fees. We will notify you if you need to pay any final fees before we issue your permit.
- Pay Permit Fees Online
- Get an SDCI Permit Fee Statement
Print your permit.
- If your permit does not require review, you can print your permit immediately after you apply.
If your permit requires review, our electrical plan reviewers will issue your permit when your plans meet all our code.
The contractor or installer is responsible for scheduling each inspection online or by calling (206) 684-8900 before the permit expires. You must have your permit number available when you call for an inspection.
Most permits require three electrical inspections: cover, service, and final. If your project has a feeder to a subpanel, you will also need to schedule feeder inspections. These inspections can be done at the same time, but you must schedule them separately. To help not overload our inspections cap maximum, schedule only one inspection and contact your inspector on the morning of your inspection to notify them of any additional inspections you will need.
